IoT-Router 7.6.5-po

Version 7.6.5

Date 2021-04-23

Update from 7.0.0-po, 7.0.0-rc.14-po, 7.0.1-po, 7.1.0-po, 7.1.1-po, 7.1.3-po, 7.1.4-po, 7.1.8-po, 7.1.10-po, 7.2.2-po, 7.3.0-po, 7.3.1-po, 7.4.0-po.
Changes:
(since v7.4.0)* Integrate PMS version 3.1.0
* Fix host activity in CWMP info
* Add device_state_id checking and upload changes to S3. Add dev_id, mcu_uid, mcu_test info to the briefinfo
* Add default device_id(model_id)=PEJIR01_unkn and device_key(model_key)=12345678### Web:
##### Web v1.11.8:
* Update 35_luci-theme-perenio, add set luci.main.lang='en'
##### Web v1.11.7:
* Fix - Unexpected error in UI when idata is absent### PDM
##### PDM v2.2.5
* Rework offline sending mechanism for always-on devices
* Rework online status for not battery devices to avoid sending read requests when the device is offline##### PDM v2.2.4
* Relay integration
* Handling siren off in service camera
* Refactoring the ZigBee Sensor Storage
* WiFI status on gateway
* Restart wlan0 at the gate in case of disconnection with cloud
* Status indication provided on the gateway
* Message queue for the latest values from sensors##### PDM v2.1.8
* Fix temperature and humidity value### PL v1.3.41
* reboot on zigbee signal status not ok
* rejoin procedure applied for zigbee network joining
* repeated beacon requests added after power off
* blinking removed for the zigbee mode### zb-host v2.0
* Update zb-host binary
* Fix device joined for multiendpoint devices
* Fix random EUI64 for broadcast messages### MCU v6.2.0:
* Add EEPROM storage for selftest results
* Add command to read STM32 UID# Summary:
The additional Firmware version of
* Web: v1.11.8
* MCU: v6.2.0
* PDM(KCS): v2.2.5
* PMS(EasyCWMP): v3.1.0
* zb-host: v2.0
The firmware version of additional ZigBee devices
* Power Plug(PEHPL01): v1.3.41
* Leak Sensor(PECLS01): v5
* Motion Sensor(PECMS01): 41030002
* Door&Window Sensor(PECWS01): -
* Temperature&Humidity Sensor(PEFTH02): -
* Smoke Sensor(PECSS01): -